High Strength 304 Profile Inflatable Seal Door Biosafety Sealing Door

• After-sales Service: Provided
• Warranty: 1year
• Open Style: Side Hung Door
• Position: Room
• Surface Finishing: Finished
• Transport Package: Wooden Crate
• Model NO.: BS-01-IAD-1
• Specification: customized
• Trademark: JHAO
• Origin: China
• Production Capacity: 500 Sets/Year

Product Description

Product Description

Pneumatic Seal Door--JH-BSD
----High-strength 304 profile is used as the door frame, and the door edge adopts professional inflatable sealing technology to ensure that the door is completely sealed between the door and the door frame, so as to effectively isolate the air flow inside and outside the laboratory

Main composition 
    The inflatable seal door is mainly composed of door frame, door page, inflatable sealing strip and inflatable and deflated control system; The inflatable seal is embedded in the groove of the door page skeleton. 

 Working principle
    When the door is opened, the inflatable expansion seal is deflated and contracted in the groove. 
    When the door is closed, the inflatable seal is inflated and expanded to form a seal between the door and the door frame, while the door is tightly locked.

Peculiarity

1,Sealed by an inflatable seal between the door frame and the door page
2,304/316 material door frame or 304/316 material door page
3,The lowest threshold step may be flush with the floor
4,Dedicated PLC control panel and pneumatic control unit
5,Electromagnetic lock locking for remote locking (optional)
6,Emergency buttons on both sides cut off the power to the solenoid lock
7,Manual safety valves on both sides can be deflated in the event of a power failure
8,Double or single layer tempered glass viewing window
9,Basically meet the power supply and compressed air provided by the utility works

 

 

Product Parameters

Model	BS-01-IAD-1
Installtion method	Flush with the wall panel
Airtight method	Sealing ring inflation barrier
Control mode	Siemens PLC
Communication mode	RS232 RS485 TCP/IP
Compressive strength	≥2500Pa
Corrosion resistance	H2O2 sterilization,  formaldehyde  sterilization,  disinfectant
Work environment	-30ºC+50ºC
Switching time	Inflatable≤5s   Deflation≤5s
Open mode	Physics button/Infrared sensing /Combination lock
Locking method	Electromagnetic lock interlock
Doorframe material	304/316
Door leaf material	304/316
Filling material	Rock wool
Sealing strip material	Silicon rubber
Inlet medium	Compresssed air
Inflation pressure	≥0.25Mpa
Action mode	The electromagnetic valve
Pressure interface gauge	RC1/8
Power Supply	220V 50Hz
Net weight	120KG
Door closer	DORMA
Window	Tempered glass
Door handle	¢25mm U-shaped
Poit lamp	Red closed state,green passage
Escape device	Yes
Pressure monitoring	Yes
Error alarm	Low pressure<0.15Mpa
BMS system	Accessible
Inspection report	Verifiction Report of the Third Party (National Inspection Center)
Validation Documentation	3Q documents
Customized services	Yes
After-sales service	Yes
Installation Services	Additional quotations are required for different regions and countries

Company Profile

Certificate

Packaging & Shipping