Biosafety Mechanical Seal Pass Box High Grade Laboratory

• Noise: 60-70db
• Surface Treatment: 304 Wire Drawing
• Inside Diameter: Customizable
• Installation: Flush with The Wall
• Operating Principle: Inflatable Sealed, Double Door Interlocking
• Type: Electronic Chain
• Model NO.: BS-02-MPB-1
• Transport Package: Wooden Crate
• Trademark: JHAO
• Origin: China
• Production Capacity: 500PCS/Year

Product Description

Product Description

The mechanical compression seal transfer window is an auxiliary equipment to reduce cleanroom pollution, mainly used for the transfer of small items between different clean areas. Its double doors are mechanically pressed to ensure airtightness. There is a highly elastic sealing ring on the door panel of the transfer window, and a sealing tape is formed between the door and the door frame.

 

Features of mechanical seal transfer window:
1,The double door adopts mechanical or inflatable sealing to ensure the airtightness of the logistics channel.

2,There are highly elastic sealing rings and inflatable sealing rings on the door panel, and a double-layer sealing belt is formed between the door and the door frame through the pressing mechanism.

3,There is a tempered glass window on the door panel to facilitate the observation of the working condition of the cavity.

4,A vaporized hydrogen peroxide generator can be integrated to supply hydrogen peroxide gas to the inside of the transfer window for biological decontamination of the outer surface of the material.

5,Real-time monitoring of temperature, humidity, pressure difference and other parameters inside the transmission window. (Additional configuration required for concentration detection during HO2O sterilization).

6,It has an independent PLC control system and a maintenance plate on the low clean surface, which is convenient for maintenance and maintenance;

7,The interlock control is interlocked by a solenoid valve or electric plug-in lock; Two doors cannot be opened at the same time.

8,The installation method is to choose a convenient position in the wall, and then open the hole, the hole is about 10mm larger than the outer diameter of the transmission window. Place the transfer window inside the wall. After the balance is fixed, use rounded corners or other decorative strips to decorate the gap between the transfer window and the wall, and then seal and modify it with glue. (Concrete wall, additional embedded parts required).

9,Provide customized design according to customer needs, including the size of the transfer window to carry out cavity design, installation position optimization, opening direction confirmation, configuration confirmation, automatic control confirmation, etc.; (Additional equipment is required for the shelves for passing items).

 

Product Parameters

Model	MODEL-JH-MSPB
Installtion method	Flush with the wall panel
Airtight method	Sealing strip compression barrier
Control mode	Siemens PLC
Communication mode	RS232 RS485 TCP/IP
Compressive strength	≥2500Pa
Corrosion resistance	H2O2 sterilization,  formaldehyde  sterilization,  disinfectant
Work environment	-30ºC+50ºC
Open mode	Physical buttons /HMI human-machine interface
Locking method	Electric plug lock interlock
Cabinet material	304
Cavity material	304/316
Sealing strip material	Silicon rubber
Power Supply	220V 50Hz
Net weight	150KG
Window	Tempered glass
Door handle	¢15mm Crank handle
Poit lamp	Red closed state,green passage
Self-cleaning function	Yes
Sterilization interface	Yes
BMS system	Accessible
Inspection report	Verifiction Report of the Third Party (National Inspection Center)
Validation Documentation	3Q documents
Customized services	Yes
After-sales service	Yes
Installation Services	Additional quotations are required for different regions and countries

Company Profile

Certificate

Packaging & Shipping