Optional Accessory: | Timer Switch, Sterilization Lamp |
---|---|
Noise: | 60-70db |
Surface Treatment: | SUS304 |
Inside Diameter: | 600*600*600mm |
Installation: | Embedded Type |
Operating Principle: | Air Shower Type |
Customization: |
---|
Suppliers with verified business licenses
The Gas-tight pass box window is characterized by the double door using the inflatable sealing method to ensure the airtightness and biological safety of the transfer window. The inflatable sealed transfer window can be used in conjunction with the hydrogen peroxide gas sterilization system for efficient sterilization and disinfection of items. Inflatable sealed transfer windows are suitable for the transfer of items in high-level laboratories and cleanrooms.
Features of inflatable sealed transfer windows:
1,The double door adopts mechanical or inflatable sealing to ensure the airtightness of the logistics channel.
2,There are highly elastic sealing rings and inflatable sealing rings on the door panel, and a double-layer sealing belt is formed between the door and the door frame through the pressing mechanism.
3,There is a tempered glass window on the door panel to facilitate the observation of the working condition of the cavity.
4,A vaporized hydrogen peroxide generator can be integrated to supply hydrogen peroxide gas to the inside of the transfer window for biological decontamination of the outer surface of the material.
5,Real-time monitoring of temperature, humidity, pressure difference and other parameters inside the transmission window. (Additional configuration required for concentration detection during HO2O sterilization).
6,It has an independent PLC control system and a maintenance plate on the low clean surface, which is convenient for maintenance and maintenance;
7,The interlock control is interlocked by a solenoid valve or electric plug-in lock; Two doors cannot be opened at the same time.
8,The installation method is to choose a convenient position in the wall, and then open the hole, the hole is about 10mm larger than the outer diameter of the transmission window. Place the transfer window inside the wall. After the balance is fixed, use rounded corners or other decorative strips to decorate the gap between the transfer window and the wall, and then seal and modify it with glue. (Concrete wall, additional embedded parts required).
9,Provide customized design according to customer needs, including the size of the transfer window to carry out cavity design, installation position optimization, opening direction confirmation, configuration confirmation, automatic control confirmation, etc.; (Additional equipment is required for the shelves for passing items).
Model | CR-PB-EP-1 |
Installtion method | Flush with the wall panel |
Airtight method | Sealing ring inflation barrier |
Control mode | Siemens PLC |
Communication mode | RS232 RS485 TCP/IP |
Compressive strength | ≥2500Pa |
Corrosion resistance | H2O2 sterilization, formaldehyde sterilization, disinfectant |
Work environment | -30ºC+50ºC |
Open mode | Physical buttons /HMI human-machine interface |
Locking method | Electromagnetic lock interlock |
Cabinet material | 304 |
Cavity material | 304/316 |
Sealing strip material | Silicon rubber |
Intake medium | Compressed air |
Inflation pressure | ≥0.25Mpa |
Action mode | The electromagnetic valve |
Pressure gauge interface | RC1/8 |
Power Supply | 220V 50Hz |
Net weight | 120KG |
Window | Tempered glass |
Door handle | ¢15mm U-shaped |
Poit lamp | Red closed state,green passage |
Pressure monitoring | Yes |
Self-cleaning function | Yes |
Sterilization interface | Yes |
Error alarm | Depression<0.15Mpa |
BMS system | Accessible |
Inspection report | Verifiction Report of the Third Party (National Inspection Center) |
Validation Documentation | 3Q documents |
Customized services | Yes |
After-sales service | Yes |
Installation Services | Additional quotations are required for different regions and countries |
Suppliers with verified business licenses